Epson PowerLite 1705C Quick Setup Manual

Also see for 1705C - PowerLite XGA LCD Projector: Installation manual User guide Parts list User manual Operation guide

Contents

PowerLite®1705c/1715cQuick Setup1 Turn On Your Equipment1 Connect the power cord to the back of the projector and plug the otherend into an electrical outlet.2 Open the A/V Mute slide. Make sure the slide is opened completely.3 Remove the battery cover on the remote control. Locate the two AAAbatteries that came with the projector and insert them. Then replacethe battery cover.4 To turn the projector on, press the Power button on the projector orthe remote control. The projector beeps once, and the projector’sPower light flashes green and then stays on.CAUTION: Before unplugging the projector...Shut the projector down properly:1. Press the Power button twice.2. When the orange light stops flashing and the projector beeps,you can unplug the projector.1 To raise the image, press the blue foot release button for the frontadjustable foot and lift the front. Release the button to lock thefoot in position.2 Adjust the ImagePower button

/ 4

Related manuals for Epson 1705C - PowerLite XGA LCD Projector