20Figure 5-4Enter user name and password, and click “Login”.Step 7Log in the WEB interface of the device. Default user name is admin. Password is the one set during initialization.5.1.1.2 Modify Device NetworkModify IP address of VTO to the planned IP address.Select “System Config> Network Config> TCP/IP”.Step 1The system displays “TCP/IP” interface, as shown in Figure 5-5.Figure 5-5Enter the planned “IP Address”, “Subnet Mask” and “Default Gateway”, and click “OK”.Step 2After modification is completed, VTO reboots automatically, while the following twocases occur at WEB interface. If PC is in the planned network segment, WEB interface jumps to new IP logininterface automatically. If PC is not in the planned network segment, login will be failed. Please add PC tothe planned network segment and login WEB interface again.
