D-Link Unified Access System Software User Manual12/10/09Page 276 Managing LLDP Document 34CSFP6XXUWS-SWUM100-D7• Click Refresh to update the page with the latest information from the router.LLDP-MED Remote Device InformationThis page displays information on LLDP-MED information received from remote clients on the selected local interface. Todisplay this page, click LAN > Monitoring > LLDP Status > LLDP-MED > Remote Device Information in the navigationtree.Figure 191: LLDP Remote Device InformationExtended PoE Specifies if local device is a PoE device.• Device Type. Specifies power device type.Extended PoE PSE Specifies if extended PSE TLV is present in LLDP frame:• Available: Specifies available power sourcing equipment's power value in tenths ofwatts on the port of local device.• Source: Specifies power source of this port.• Priority: Specifies PSE port power priority.Extended PoE PD Specifies if extended PD TLV is present in LLDP frame.• Required: Specifies required power device power value in tenths of watts on the portof local device.• Source: Specifies power source of this port.• Priority: Specifies PD port power priority.Table 172: LLDP-MED Local Device Information FieldsFieldDescriptionLocal Interface Specifies the list of all the ports on which LLDP-MED is enabled.Remote ID Specifies the remote client identifier assigned to the remote system.Capability Information Specifies the supported and enabled capabilities that were received in MED TLV onthis port:• Supported Capabilities: Specifies supported capabilities that were received in MEDTLV on this port.• Enabled Capabilities: Specifies enabled capabilities that were received in MED TLVon this port.• Device Class: Specifies device class as advertised by the device remotely connectedto the port.Table 171: LLDP-MED Local Device Information Fields (Cont.)FieldDescription
