Craftsman 917.203920 Operator's Manual

Also see for 917.20391: Operator's manual Operator's manual

5. INSTALL ANTI-SWAY BAR (S)(IF EQUIPPED)ANTI-SWAY BAR (S)_ Towards TowardsTransaxle Mower Deck90 ° End Integrated Washer EndFrom right side of mower, first insert90 ° end of anti-sway bar (S) into hole intransaxle bracket (T), located near leftrear tire in front of transaxle.NOTE: Flashlight may be helpful.Transaxle Bracket (T)Located Between Rear TiresNOTE: Depending on model, bracket (T) maybe different than shown but hole for anti-swaybar will be in same position/location.• Pivot the integrated washer end of anti-sway bar (S) towards mower deck bracketon right side of mower. Insert integratedwasher end of bar into hole in rear mowerbracket (D). Move mower as needed toinsert integrated washer end of bar intorear mower bracket (D).• Secure with small washer and smallretainer spring as shown.6. ATTACH MOWER SIDE SUSPENSIONARMS (A) TO CHASSIS• Position front hole in side suspension arm(A) over pin on outside of tractor chassisand secure with large washer and largeretainer spring (B).• Repeat on opposite side of tractor.A. Mower Side Suspension ArmsB. Retainer SpringD. Right Side Rear Mower Bracket7. ATTACH REAR LIFT LINKS (C)• Insert rod end of rear lift link (C) into hole(U) in tractor lift shaft suspension armand pivot link down to mower.• Lift rear corner of mower and position slotin link assembly over pin on rear mowerbracket (D) and secure with large washerand large retainer spring.• Repeat on opposite side of tractor.23