Craftsman 3000 MAX PSI Operator's Manual

Contents

Your pressure washer requires some assembly and is readyfor use only after it has been properly serviced with therecommended oil and fuel.If you have any problemswith the assembly of yourpressurewasher, please call the pressurewasher helplineat 1=800-222-3136.UNPACKTHEPRESSUREWASHER1. Removeeverything from carton except pressure washer.2. Open carton completely by cutting each corner from topto bottom.6. Connect pressure hose to spray gun and pump.7. Connectwater supply to pump.8. Attach nozzleextension to spray gun.9. Attach quick connect selector nozzle to nozzle extension.Attach Handleand Accessory Tray1. Place handle (A) onto handle supports (B) connected tomain unit. Make sure holes (C) in handle align with holes(C) on handle supports.3. Remove pressure washer from carton.CARTONCONTENTSCheck all contents. If any parts are missing or damaged, callthe pressure washer helpline at 1-800-222-3136.• Main Unit• Handle• Accessory Tray• High Pressure Hose• Spray Gun• Nozzle Extensionwith Quick Connect Fitting• Quick Connect Selector Nozzle• Oil Bottle• Hose Wrap• DetergentSiphoning Hose/Filter• Bottle Bracket Wireform (2)• PerfectMixTM Siphoning Unit/Hose• Parts Bag (which includes the following):• Operator's Manual• Owner's Registration Card• HandleFasteningHardwareKit (which includes):• Handle Bolts (2)• Carriage Bolt (2)• Rope Guide (1)• Plastic Knobs for Handle (2)• Plastic Knob (3)• Tree Clips (4)Become familiar with each piece before assembling thepressure washer, identify all contents with the illustration onpage 6. if any parts are missing or damaged, call thepressure washer helpline at 1-800-222-3136.ASSEMBLINGPRESSUREWASHERYour Craftsman pressure washer will need assembly beforeoperation:1. Fill out and send in registration card.2. Attach handle and accessory tray.3. Connect detergent siphon hose to pump.4. Add oil to engine crankcase.5. Add fuel to fuel tank..NOTICEhot.3..insert handle carriage bolts (D) through holes frominside of unit and attach a plastic knob (E) from outsideof unit. Tighten by hand. By loosening both knobs to themiddle section of the attachment bolt, the upper handlecan fold forward to store fiat atop the cold engine.DONOT fold the handle down while the engine isPlaceaccessory tray (F) over holes (6) on handle(viewing from back of unit). Push the tree clips (H) intothe holes until they sit fiat against the accessory tray./insert supplied accessories in spaces provided inaccessorytray. See How to Use Accessory Tray.