Craftsman 11593 Operator's Manual

Contents

TO iNSTALL BATTERY PACKSee Figure 3.[] Place the battery pack in the tool.[] Make sure the latches on each side of the batterypack snap into place and the battery pack is securedon the tool before beginning operation.ACAUTION: When placing battery pack in thetool, be sure raised rib on battery pack aligns withthe bottom of the spotlight and latches into placeproperly. Improper installation of the battery packcan cause damage to internal components.WARNING: Always remove battery pack from yourtool when you are assembling parts, making adjust-ments, cleaning, or when not in use. Removing bat-tery pack will prevent accidental starting that couldcause serious personal injury.TO REMOVE BATTERY PACKSee Figure 3.[] Depress the latches on the side of battery pack.[] Remove the battery pack.ALIGNRAISEDRiB ONBATTERYPACKWITHGROOVEIN BATTERYPORTDIEHARD®19.2 VLITHIUM-IONBATTERYPACKDEPRESSBOTHLATCHESTORELEASE CRAFTSMAN19.2 VNICKEL-CADMIUMBATTERYPACKLOCK-0NBUTTONSWITCHTRIGGERFig. 4SWITCH TRIGGERSee Figure 4.To turn the spotlight ON, depress and hold the switchtrigger. To turn it OFF, release the switch trigger.LOCK=ON BUTTONSee Figure 4.The spotlight is equipped with a lock-on feature, whichis convenient for continuous use for extended periods oftime.To lock-on:[] Depress the switch trigger.[] Push forward and hold the lock-on button, located onthe top of the handle.[] Release the switch trigger.[] Release the lock-on button.[] To release the lock, depress and release the switchtrigger._IL WARNING: Never leave the spotlight in the locked-on position and unattended. Failure to heed thiswarning could result in serious injury or propertydamage.Fig. 3