63Steering InspectionThe steering assembly of the ATV should be checked periodically for loose nutsand bolts. If loose nuts and bolts are found, have your dealer tighten them beforeriding your vehicle.Camber and CasterThe camber and caster are non-adjustable.Toe Alignment CheckDo not attempt to adjust the tie rod for toe alignment. Severe injury or death canresult from improper adjustment. Contact 1-800-643-7332 to arrange for properadjustment.The recommended toe alignment is 1/8˝ to 1/4˝ (3 to 6mm) toe out.1. Set the handlebars in astraight -ahead position and holdthem in this position.2. Measure A and B. A minus3. B should be 1/16˝ to 1/8˝(1.5 to3mm).4. If this measurement needs to beadjusted, contact your dealer forservice.WARNING
