Cisco 7200 Series Instructions Manual

Also see for 7200 Series: Guide Guide Manual Quick reference guide Quick reference guide

1Doc. No.Cisco Systems, Inc.All rights reserved.170 West Tasman DriveSan Jose, CA 95134-1706USACisco Systems, Inc.Corporate HeadquartersCopyright © 1996Cisco 7200 Series Memory ReplacementInstructionsProduct Numbers: MEM-NPE-8MB=, MEM-NPE-16MB=, MEM-NPE-32MB=,MEM-NPE-64MB=, MEM-NPE-128MB=, MEM-I/O-FLC8M=, MEM-I/O-FLC16M=,MEM-NPE-FLC20M=This document explains how to replace the main, Flash, and ROM monitor memory for theCisco 7200 series routers. Read this entire document before upgrading the memory in your router.Note Use this document in conjunction with the Cisco 72xx Installation and Configuration Guidethat shipped with your Cisco 7200 series router.This document contains the following sections:• Additional Information, page 2• Cisco 7200 Series Overview, page 3• Memory Systems Overview, page 6• Installation Prerequisites, page 9— List of Parts and Tools, page 9— Safety Guidelines, page 9— Ensuring Easy Access to the Router, page 11• Removing and Replacing Memory SIMMs and the Boot ROM, page 12— Powering Down the Router and Disconnecting Input Power, page 13— Removing the Input/Output Controller, page 1478-3226-02