Cisco 12000 Series Replacement Instructions Manual

Also see for 12000 - Series Chassis Modular Expansion Base: User guide Software guide Overview guide Installation and configuration Datasheet

Contents

Corporate Headquarters:Copyright © 2011 Cisco Systems, Inc. All rights reserved.Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USACisco 12000 Series RouterMemory Replacement InstructionsProduct Numbers: MEM-GRP/LC-64=, MEM-DFT-GRP/LC-128, MEM-GRP/LC-128=, MEM-GRP/LC-256=,MEM-GRP-256=, MEM-GRP-512=, MEM-LC-PKT-64=, MEM-LC-PKT-128=, MEM-LC1-PKT-256=,MEM-PKT-512-UPG=, MEM-PRP-512=, MEM-PRP-1G=, MEM-LC-ISE-512=, MEM-LC-ISE-512A=, MEM-LC-ISE-1G=Document Order Number: DOC-784338=This publication describes procedures for upgrading or replacing memory on the Cisco 12000 SeriesRouter Gigabit Route Processor (GRP), Performance Route Processor (PRP), andCisco 12000 Series Internet Router line cards.ContentsThis publication contains the following sections:• Important Information, page 2• GRP, PRP, and Line Card Memory Overview, page 2• Preparing for Installation, page 18• Replacing and Upgrading Route Processor Route Memory, page 19• Removing and Installing Line Card Memory, page 23• Regulatory, Compliance, and Safety Information, page 34• Obtaining Documentation, page 36• Obtaining Technical Assistance, page 38• Obtaining Additional Publications and Information, page 39