Turning ON/OFF the Machine2-14Before You Start Using the Machine2NOTE• If the machine is managed with department IDs or user IDs, the log-in screen appears.In this case, enter your department ID or user ID (and password). (See Chapter 2,“Basic Operations,” in the Reference Guide.)• You can select the top screen of the desired function that appears when the machineis turned ON. (See Chapter 3, “Configuring the Machine’s Basic Settings,” in theReference Guide.)When the Machine Is Turned ON for the First TimeWhen the machine is turned ON for the first time, the initial setup screens (SetupGuide) appear on the touch panel display, navigating you to perform the followingbasic setup items:• Language and country/region• Mixing the toner• Date & Time Settings• Fax settings (unit telephone number, unit name, and telephone line type)• IP address settingsFollow the procedure below to quickly set the machine configuration and use itsbasic functions immediately.3 Wait until the machine is ready toscan.The screen on the left is displayed until themachine is ready to scan.The screen on the left is displayed when themachine is ready to scan.IMPORTANTIf the machine is turned ON for the firsttime, the display language selectionscreen appears. In this case, proceedto perform the initial setup. (See“When the Machine Is Turned ON forthe First Time,” on p. 2-14.)Downloaded from ManualsPrinter.com Manuals
