Setup Flow2-6Before You Start Using the Machine2Setup FlowThe machine is equipped with a wide variety of functions, some of which mayrequire optional equipment or specific setups to become fully functional. To identifywhat functions require procedures be completed before using the machine, look atthe setup flow provided below. Use the tables (if included) to see which functionsrequire the corresponding procedure. (The procedure is required for the functionswith a “ ”.)NOTEFor available functions on a product basis, see “Available Features,” on p. xii.* Cable connection is not required for printing from a USB memory media device.1 Cable Connection (See “Cable Connection,” on p. 2-9.)Connect the machine to your computer or network using the USB or Ethernet cable. If the Faxfunction is available, connect the telephone cable to the machine and the wall jack.CopySend FaxPrint RemoteScanRemoteUIE-Mail/I-Faxto FileServerto USBMedia Stand-alone fromComputer*2 Initial Setup (See “Turning ON/OFF the Machine,” on p. 2-13.)When the machine is turned ON for the first time, the initial setup screens appear on the touchpanel display. Perform the following setup items as required:• Language and country/region• Mixing the toner• Date & Time Settings• Fax settings (unit telephone number, unit name, and telephone line type)• IP address settingsCopySend FaxPrint RemoteScanRemoteUIE-Mail/I-Faxto FileServerto USBMedia Stand-alone fromComputerDownloaded from ManualsPrinter.com Manuals
