Canon imageclass MF229DW Quick Start Manual

Also see for i-SENSYS MF217w: Getting started User manual Getting started Service manual

Contents

Canon imageclass MF229DW Quick Start Manual Manual pdf 9 page image

9EnSpecifying the Initial SettingsFollow the instructions on the screen, set the language andtime. For details on navigating the menu and how to input thenumbers, see “Navigating the Menu and Text Input Method”( P.8).LanguageEnglishFrenchPortugueseSpanishEnglishCurrent Time Set.08/08 2014 10:00 AM(0:00-12:59)ApplyChoosing the Method to Connect theMachine to the Computer● Connecting via a Wired LANYou can connect the machine to the computer through awired router. Use the LAN cables to connect the machine tothe wired router (access point).Make sure that there is an available port in the router to connectthe machine and the computer.Have a LAN Cable of Category 5 twisted-pair cable or higher ready.● Connecting via a USB cableYou can connect the machine to the computer using a USBcable.Make sure that the USB cable you use has the followingmark.● Connecting via a Wireless LAN(MF229dw/MF227dw Only)You can connect the machine to the computer through awireless router*. Since it is connected to wireless, no LANcables are needed.* A wireless router (access point), which supports IEEE802.11b/g/n,is required.Check if your router has a buttonSelect from the following two methods depending on therouter (access point) that you are using.● There is a button.You can easily setup if your router (access point)has a button, and if the mark is on the router.● There is no button.If there is no button on your router (access point), youmay manually select SSID and complete the settings.NOTE• If you are looking to install your new device via aWireless Network connection, you can find a video andwritten guides with step-by-step instruction to assistyou through the process from the following URL:www.usa.canon.com/WirelessHelpViewing these guides will ensure a smooth setup of thedevice into your existing wireless environment.Choosing the Method to Connect:Via Wireless LAN or Other Method● MF229dw/MF227dwDo you want to use thewireless LAN to connectto the network?The settings can beconfigured later.Yes NoCurrent Time Set.Must rechg. batteryfor 24 hours to savetime settings. Afterturning main power1/3CloseYesNoThere is a button.Start from step 4 of ”Push Button Mode” (P.11).There is no button.Start from step 4 of ”Setting the Access PointManually” (P.11).Connect to the computer via a wired LANProceed to “Connecting via a Wired LAN” (P.10).Connect to the computer via a USB cableProceed to “Connecting via a USB Cable” (P.10).Connect to the computer via a wireless LAN laterProceed to “Connecting via a Wireless LAN(MF229dw/MF227dw Only)” (P.10).● MF216nCurrent Time Set.Must rechg. batteryfor 24 hours to savetime settings. Afterturning main power1/3CloseConnect to the computer via a wiredLANProceed to “Connecting via a WiredLAN” (P.10).Connect to the computer via a USBcableProceed to“Connecting via a USBCable” (P.10).