Canon imageclass MF229DW Quick Start Manual

Also see for i-SENSYS MF217w: Getting started User manual Getting started Service manual

Contents

Canon imageclass MF229DW Quick Start Manual Manual pdf 10 page image

10EnConnecting via a Wired LANChecking Before the SetupInternet RouterorhubLAN cableAre the computer and the router (or hub) properlyconnected using a LAN cable?For more information, see the instruction manual for thenetwork device you are using, or contact the networkingdevice manufacturer.Have the network settings on the computer beencompleted?If the computer is not properly configured, you may not usethe wired LAN connection even after completing the followingsettings.NOTE• You cannot connect both the wired LAN and wirelessLAN at the same time. In addition, the machine is set tothe "Wired LAN" by default.• When you connect to a network environment that is notsecurity protected, your personal information could bedisclosed to third parties. Please use caution.• If you connect through a LAN in the office, contact yournetwork administrator.Connecting via a Wired LAN1 Connect the LAN cable.The IP address will be automatically configured in 2minutes. If you want to set the IP address manually, seethe following items.e-Manual “Network” ▶ “Connecting to a Network” ▶“Setting IP Addresses”2 Install the driver and software using the UserSoftware and Manuals DVD-ROM.See “For details on the installation procedures:” (P.13).Proceed to “Setting a Paper Size and Type” (P.13).Connecting via a USB CableConnect the USB cable after installing the MF Drivers and theMF Toolbox.NOTE• If you connected the USB cable before installing the MFdrivers, refer to the MF Driver Installation Guide.1 Install the driver and software using the UserSoftware and Manuals DVD-ROM.See “For details on the installation procedures:” (P.13).2 Connect the USB cable.Proceed to “Setting a Paper Size and Type” (P.13).Connecting via a Wireless LAN(MF229dw/MF227dw Only)Checking Before the SetupWireless LAN RouterInternetIs the computer connected to the router (access point)correctly by a LAN cable or wireless LAN?For more information, see the instruction manual for thenetwork device you are using, or contact the networkingdevice manufacturer.Have the network settings on the computer beencompleted?If the computer is not properly configured, you may notuse the wireless LAN connection even after completing thefollowing settings.