Canon imageRUNNERC1028iF Starter Manual

Also see for imageRUNNER C1028i: Manual

Canon imageRUNNERC1028iF Starter Manual Manual pdf 6 page image

42 Set Up the MachineSet Date and TimeBefore using the machine, you MUST set the current date and time. The date and time settings are used asstandard for timer settings functions.Information About the KeysPress [▼] [▲] [◀] [▶] to move the cursor position.Use (Scroll Wheel) to move the cursor position.Press the Left/Right Any key to select the alternative key at the bottom of the display.Press - (numeric keys) to enter numbers.Press [OK] to set the entry or to proceed to the next screen.Press [Back] to return to the previous screen.Press (Clear) to delete the entire entry.The display returns to the Standby mode:The machine may enter the Standby mode (Auto Clear function) while you are setting it up. Make the setting again from the main menu. The default setting is 2 minutes.To change the settings, see “Introduction of the Machine” in the e-Manual.The display turned OFF:The machine may enter the Sleep mode while you are performing setup. Press (Power) to turn the display back ON and continue the setup. The default setting is 15minutes. To change the settings, see “Introduction of the Machine” in the e-Manual.●‒‒‒‒‒‒‒●●Make sure that the country/region is set correctly for yourcountry/region.If the country/region is not set or set incorrectly, you mayhave problems in sending/receiving faxes.4 The main screen appears on the display asshown below. is displayed only if in is set to . (See “Security,”in the e-Manual.)