Canon imageRUNNERC1028iF Starter Manual

Also see for imageRUNNER C1028i: Manual

Canon imageRUNNERC1028iF Starter Manual Manual pdf 23 page image

21English2 Set Up the MachineThis is the setting for obtaining an IP address automatically. If you do not need to conigure this settingmanually, follow the procedure below.(In case the machine cannot obtain the IP address automatically, you can specify the IP address, subnetmask, and gateway address. If you do not know them, skip each entry by pressing [OK].)Press (Main Menu) → → * → → → → → → → → Enter the IP address → Enter the subnet mask → Enter the gateway address → →(Main Menu) → Turn of the main power → Restart the machine.* If the screen appears prompting you to enter the System Manager ID and System Password, enter theSystem Manager ID and System Password using - (numeric keys), then press (Log In/Out). Fordetails, see “Security,” in the e-Manual.For more information on this setting, see “Network Settings,” in the e-Manual.Set IP Address AutomaticallyCheck IP Address SettingTo make sure this machine is communicating with the network properly, follow the procedure below.1 Press (Main Menu).2 Press the right Any key to select Func.>.3 Use [▼], [▲] or (Scroll Wheel) to select, then press [OK].If the screen appears prompting you to enter the SystemManager ID and System Password, enter the SystemManager ID and System Password using - (numerickeys), then press (Log In/Out). For details, see“Security,” in the e-Manual.4 Use [▼], [▲] or (Scroll Wheel) to select, then press [OK].