Cause Corrective ActionPaper is loaded askew. 5. Close the Top Cover.(See "Loading Sheets in the Printer.") →P.664Note• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off orLoose in the Skew Check Lv. setting of the printer menu. However, this may cause jams because paper maybe askew when it is printed. Also, the Platen may become soiled, which may soil the back of the next docu-ment when it is printed.Paper cutting failed.Cause Corrective ActionThere are sheets left on theEjection Guide.1. Lift the Release Lever and remove the paper.2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-play Screen, press the OK button.Printing will resume, starting from the page on which the error occurred.There is a foreign object bythe Output Tray, obstruct-ing the Cutter Unit.1. Lift the Top Cover and remove the foreign object.2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-play Screen, press the OK button.Printing will resume, starting from the page on which the error occurred.You are not using the print-er under the recommendedenvironmental conditionsfor the paper.Use the printer only where the recommended environmental conditions for the paper aremet. Note that various environmental conditions are recommended for various types ofpaper. For details on the recommended environmental conditions for paper, see the PaperReference Guide.(See "Types of Paper.") →P.623You are using paper that isnot compatible with auto-matic cutting.Specify Manual as the cutting method and cut the roll manually.(See "Specifying the Cutting Method for Rolls.") →P.654For information about paper that is compatible with automatic cutting, see the Paper Ref-erence Guide.(See "Types of Paper.") →P.623The Cutter Unit stops inthe middle of cutting.If the Carriage is out, move the Carriage out of the way, away from the paper.If the Cutter is out, move the Cutter to the right side (away from the paper) and removethe jammed paper.(See "Clearing Jammed Roll Paper.") →P.847If the paper cannot be cut using the Cutter Unit, specify Manual as the roll cutting meth-od and cut the roll manually.Error Message > Messages regarding paper >iPF825 Paper cutting failed.13897
