Cause Corrective ActionYou are using a paper thatdoes not dry easily.In this case, in the Control Panel menu, complete the settings for Dry time and Areain Scan Wait Time.However, note that printing will now take longer.(See "Main Menu Settings.") →P.730The back side of the paper is dirtyCause Corrective ActionThe Platen has become dirty after borderless print-ing or printing on small paper.Open the Top Cover and clean the Platen.(See "Cleaning Inside the Top Cover.") →P.833Set CarriageScanWdth to Fixed.The Platen has become soiled due to printing on thePlaten because width detection is deactivated.Activate width detection, and open the Top Cover and clean thePlaten.(See "Cleaning Inside the Top Cover.") →P.833Open the Top Cover and clean the Platen. After this, manuallyadvance the roll onto the Platen before printing.(See "Cleaning Inside the Top Cover.") →P.833(See "Feeding Roll Paper Manually.") →P.650The Paper Retainer is soiled. Clean the Paper Retainer.(See "Cleaning Inside the Top Cover.") →P.833Printed colors are inaccurateCause Corrective ActionColor adjustment has not been activated in the Ad-vanced Settings of the printer driver.In the Advanced Settings of the printer driver, access Color Set-tings in Color Mode to adjust colors.Colors have not been adjusted on the computer ormonitor.Refer to the computer and monitor documentation to adjust thecolors.Adjust the settings of the color management software, referring tothe software documentation as needed.The Printhead nozzles are clogged. Print a test pattern to check the nozzles and see if they are clog-ged.(See "Checking for Nozzle Clogging.") →P.813In the Windows printer driver, Application ColorMatching Priority is not selected.Click Special Settings on the Layout sheet of the printer driverand select Application Color Matching Priority in the dialogbox.Printhead characteristics gradually change throughrepeated use, and colors may change.Adjust the Printhead alignment.(See "Automatic Straightening of Lines and Colors (AutoHead Adj.).") →P.676(See "Manual Straightening of Lines and Colors (ManualHead Adj).") →P.678Troubleshooting > Problems with the printing quality >The back side of the paper is dirty iPF82512864
