InformationSetting Item Description, InstructionsSystem Info Firmware Displays the version of the printer and firmware.Boot Displays the version of the boot ROM.MIT Displays the version of the MIT database format.s/n Displays the printer's serial number.MAC Displays the MAC address.IP Displays the IP address.HDDSpace Displays the space available on the printer's hard disk.Error Log 1: xxxxxxxx-xxxx Displays the two most recent error message numbers,most recent first.2: xxxxxxxx-xxxxSubmenu DisplayPress the Information button to display this information, one after another: the Maintenance Cartridge capacity and remain-ing ink levels, paper information, printer information, and HP-GL/2 settings information.Each time you press the Information button, the following submenus are displayed.Note• Press any button other than the Information button to restore the previous mode.• After you display a submenu, the printer will revert to the previous mode in about ten seconds if no print jobis received or if you do not operate the printer.Remaining Maintenance Cartridge capacity and ink levelsThe remaining Maintenance Cartridge capacity is shown on the top level of the Display Screen.The remaining level of each ink is shown on the bottom level of the Display Screen. Ink levels shown on the Display Screencorrespond to the inks identified by the color labels on the bottom of the Display Screen.These symbols may be displayed above the ink level: ! if ink is low, × if no ink is left, and ? if ink level detection is not on.Remaining ink is indicated as follows.Printer Parts > Control Panel >iPF825 Submenu Display9743
