Canon imagePRESS C7010VPS Operating Information Manual

Also see for IMAGEPRESS C6010S: Safety instructions Program guide

Contents

Canon imagePRESS C7010VPS Operating Information Manual Manual pdf 312 page image

Change the warning timeIntroductionWhen operator interaction is required now or soon, the dashboard and the operator at-tention light can warn you. This is a trigger that action is required now or soon., for ex-ample load a required media type or empty an output location. You can define how longin advance the warning message is displayed.By factory default, the function 'Warning in advance' is enabled and set to 10 minutes.Then the dashboard starts to display the warning 10 minutes before an action becomesinevitable. If you do not respond to the warning message, the printer will stop. Dependingon the urgency of the warning message, the vertical bar in the dashboard and the operatorattention light are orange or red.#NOTE■ The operator attention light is linked to the status of the machine. For example,when the dashboard displays an orange warning, the orange light of the operatorattention light also lights up.■ You can only change the warning time when the 'Warning in advance' functionis enabled.How to change the warning time1. Touch 'System' -> 'Setup' -> 'Warning time'.2. Touch the - or + button to decrease or increase the warning time in steps of 1 minute.You can set a time from 1 - 60 minutes.3. Press 'OK'.■ The dashboard, on page 80■ The operator attention light, on page 40Chapter 10 - Adapt printer settings to your needs312Change the warning time