Settings for the output#DescriptionValuesSettingThe automatically set value from the original docu-ment.'Auto''1- or 2-sid-ed' The output contains an image on 1 side.'1-sided'The output contains an image on both sides.'2-sided'The automatically set value from the original docu-ment.'Auto''Bindingedge' The output has a vertical format (height > width).The binding edge is at the left-hand side.When you turn a sheet over the binding edge the im-age is in readable form.'Portrait left'The output has a vertical format (height > width).The binding edge of the original is at the top.When you turn a sheet over the binding edge the im-age on the back side of the sheet is in readable form.This means that every back side of a 2-sided originalis upside down compared to the front side.'Portrait top'The output has a horizontal format (width > height).The binding edge of the original is at the left-handside.When you turn a sheet over the binding edge, the textor image is in readable form.'Landscapeleft'The output has a horizontal format (width > height).The binding edge of the original is at the top.When you turn a sheet over the binding edge, theimage on the back side of the sheet is in readable form.This means that every back side of a 2-sided originalis upside down compared to the front side.'Landscapetop'Chapter 7 - Copy jobs174Description of the copy job settings