Timer Settings 3-25Selecting and Storing Settings3 If you want to use the Auto Clear function:❑ Select <02 ON>, and proceed to step 4. If you do not want to use the Auto Clear function:❑ Select <01 OFF>, and proceed to step 5.4 Press [F2] (-) or [F3] (+) to select the desired time period press [OK].The Auto Clear Time settings are from 1 to 9 minutes (in one minute increments).You can also enter values using the numeric keys.The TIMER SETTINGS menu returns.5 Press [Reset] to return to the Basic Features screen.Energy Saver ModeIf the machine is not used (no keys are pressed) for a certain period of time, itenters the Energy Saver mode. You can specify the amount of time taken beforeentering the Energy Saver mode from 3 to 30 minutes. You can also set the EnergySaver to '02 OFF'.NOTEThe default setting is '01 ON' and '15MIN'.To reactivate the machine from the Energy Saver mode, press (Energy Saver).To enter the Energy Saver mode manually, press (Energy Saver) for more than 2seconds.You can select the power consumption in the Energy Saver mode between two levelsusing the Additional Functions menu. (See "Power Consumption in the Energy SaverMode," on p. 3-13.)If the Energy Saver and Daily Timer modes are both set, the Daily Timer settings havepriority.The machine will not enter the Energy Saver mode when:- The machine is in operation- A document is in the feeder- All paper drawers are empty- There is jammed paper in the machineF2F3OKReset
