Reinstalling the PrinterReinstalling the PrinterThe basic workflow for reinstalling the printer is as follows.For detailed instructions, see the Setup Guide.Assemble the stand1 Referring to the Printer Stand Setup Guide, assemble the Stand.Caution• The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourselfposes a risk of injury or bending the Stand.• When assembling the Stand, lock the casters. In addition, always unlock the casters before moving theassembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury ordamage to the location site.Install the printer1 Mount the printer on the assembled Stand and tightenthe screws firmly.Caution• Moving the printer requires at least six people, holding it on both sides. Be careful to avoid back strainand other injuries.• When moving the printer, firmly grasp the Carry-ing Handles (a) under each side. The printer maybe unsteady if you hold it at other positions,which poses a risk of injury from dropping theprinter.aiPF830 Series Reinstalling the PrinterBasic GuidePrinter Relocation Preparing to Transfer the Printer75
