Important• When lowering the Ejection Guide, lower itslowly. If the Ejection guide is lowed forcefully,the Ejection Supports (a) may hit the roll andscratch the printing surface.a7 Close the Top Cover.8 Press the OK button.The paper is now advanced.9 Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting andthe barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") ➔ User's GuideManageR-emainRoll Barcodes Printer Operation After the Paper is FedOff Printed A menu for selection of the type of paper is shown on the Display Screen.Press ▲ or ▼ to select the type of paper, and then press the OK button.Not prin-tedOn Printed The type and amount of paper left is automatically detected based on the barcode printed on theroll.There is no need to specify the type and length of the paper.Not prin-tedA menu for selection of the type and length of paper is shown on the Display Screen.Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.Important• Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Speci-fying the Cutting Method for Rolls.") ➔ User's GuideNote• For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Ref-erence Guide.") ➔ User's Guide• Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing qual-ity. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔ P.89Removing the Roll from the PrinterRemoving the Roll from the PrinterRemove rolls from the printer as follows.Note• If you need to cut a printed roll, select Paper Cutting in the printer menu and cut the roll at the desired position.(See "Specifying the Cutting Method for Rolls.") ➔ User's GuideRemoving the Roll from the Printer iPF830 SeriesBasic GuideHandling Paper Handling rolls18
