Canon iPF830 Series Basic Manual

Also see for iPF830 Series: Quick guide

Contents

Canon iPF830 Series Basic Manual Manual pdf 106 page image

The printer stops during a print jobThe printer stops during a print jobAn error message is shown on the Display Screen ........................................................................................ 106The printer ejects blank, unprinted paper ...................................................................................................... 106An error message is shown on the Display ScreenAn error message is shown on the Display ScreenCause Corrective ActionThe last portion of roll paper was used during a print job, and papercould not be advanced because the trailing edge is taped to theroll.Remove the used roll and insert a new roll.(See "Removing the Roll from the Printer.") ➔ P.18(See "Removing the Roll Holder from Rolls.") ➔ User's Guide(See "Loading and Printing on Rolls.") ➔ User's GuideThe printer ejects blank, unprinted paperThe printer ejects blank, unprinted paperCause Corrective ActionThe leading edge of the roll paper was cutto straighten it.The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a valueother than Off in the Control Panel menu.(See "Cutting the Leading Edge of Roll Paper Automatically.") ➔ User's GuideThe Printhead nozzles are clogged. Print a test pattern to check the nozzles and make sure the Printhead is in good condi-tion for printing.(See "Checking for Nozzle Clogging.") ➔ User's GuideA print job was received from an incom-patible printer driver.Use the correct imagePROGRAF printer driver for the printer and try printing again.The printer has received print data that in-cludes HP RTL commands when AutoRotate is On in the Control Panel menu.In the Control Panel, set Auto Rotate to Off and print again.(See "Menu Settings.") ➔ User's GuideThe printer is damaged. Contact your Canon dealer for assistance.An error message is shown on the Display Screen iPF830 SeriesBasic GuideTroubleshooting The printer stops during a print job106