Canon i850 Quick Start Manual

Also see for i850: User guide Quick start guide Service manual Parts catalog Setup instructions

Contents

Canon i850 Quick Start Manual Manual pdf 51 page image

Troubleshooting49Printed PaperCurls or Ink Blots Printed paper toothin Use High Resolution Paper or Photo Paper Pro to print images that require a lot ofink (i.e. pictures with intense colors or photographs).Color Intensitysetting is too highReduce the Intensity setting in the printer driver and try printing again.1. Open the PrinterPrinterPrinterPrinter PropertiesPropertiesPropertiesProperties dialog box.2. On the MainMainMainMain tab, select ManualManualManualManual for Color AdjustmentColor AdjustmentColor AdjustmentColor Adjustment, and then click SetSetSetSet.3. Drag the IntensityIntensityIntensityIntensity slide bar to adjust the intensity.1. Open the PrintPrintPrintPrint dialog box.The PrintPrintPrintPrint dialog box can be opened by selecting PrintPrintPrintPrint in the FileFileFileFile menu.2. In the Print ModePrint ModePrint ModePrint Mode pull-down menu, select ManualManualManualManual and then click DetailsDetailsDetailsDetails.3. Click the ColorColorColorColor icon, then drag the IntensityIntensityIntensityIntensity slide bar to set the intensity.Paper feed roller isdirtyClean the paper feed roller.See "Paper Does Not Feed ProperlyPaper Does Not Feed ProperlyPaper Does Not Feed ProperlyPaper Does Not Feed Properly" on page 51Printed Surface isScratchedInappropriatepaper type usedCheck to see if the paper you are printing on is too thick or curled.See "Print Media to AvoidPrint Media to AvoidPrint Media to AvoidPrint Media to Avoid" on page 3Note that smudging may occur at the top and bottom edges of the paper whenusing Borderless Printing. Make sure that the paper you are using is compatiblewith Borderless Printing.See "Media Types Suitable for Borderless PrintingMedia Types Suitable for Borderless PrintingMedia Types Suitable for Borderless PrintingMedia Types Suitable for Borderless Printing" on page 12Incorrect positionof the paperthickness leverWhen printing on thick paper, set the paper thickness lever to the “ ”mark.This widens a gap between the print head and the paper. If the paper is scratchedeven when printing on plain paper, also try this.Problem Possible Cause Try This