0FR4-0E1Enter manually the access point name and/or security information (encryption type/authentication method or encryptionmethod/network key) of wireless LAN routers and/or access points to be connected to the machine.Connecting1Switch the connection method to wireless LAN."Switching the Connection Method to Wireless LAN or Wired LAN (MF6180dw Only)"2Write down the important information for the settings.For more information on how to check, refer to the instruction manual of the wireless LAN router or access point, orcontact the manufacturer.SSIDIt may be indicated as access point name or network name.Write down all if there is multiple SSID.It is used when entering the SSID in Step 8.Type of EncryptionYou write down here is the network key that is currently specified for the wireless LAN router or access point.The machine supports WEP or WPA/WPA2-PSK.It is used when selecting the encryption type in Step 9.WEP Authentication Method (802.11 Authentication)Open System or Shared KeyIt is used when selecting the WPA authentication method in Step 10.WPA/WPA2-PSK Encryption MethodAutomatic (AES-CCMP or TKIP) or AES-CCMPIt is used for selecting the WPA/WPA2-PSK encryption method in Step 10.Network KeyIt may be indicated as encryption key, WEP key, WPA/WPA2 passphrase, PSK or pre-shared key.You write down here is the network key that is currently specified for the wireless LAN router or access point.It is used when entering an network key in Step 11.WEP key number used for encryption (1 to 4)It is needed only when the encryption type is WEP.NOTEChecking for SSID and Network KeysIf the settings for the wireless LAN router or access point have changed, are not described or if you are not sure of thesettings, see the following."Checking the SSID or Network Key of the Wireless LAN Router/Access Point"Setting by Manually Entering SSID㻡㻠㻟㻌㻛㻌㻥㻢㻠Downloaded from ManualsPrinter.com Manuals
