0FR4-04USee "Attention (Combination of Copy Settings)" before you start copying.You can make 2-sided copies from 2-sided documents.IMPORTANTPrecautions on 2-Sided CopyingDo not touch your document when making 2-sided copying until the process is complete. After copying on the frontside is complete, the document is partially output, reserved, and fed into the machine again for copying on the backside.Be sure to close the sub-output tray before making 2-sided copying.Copying on the back side of a printed document (Manual 2-sided copying)Two-sided copying can be performed manually using a printed document. Place a printed document in the multi-purposetray to copy on the back side * .To copy on the back side of a printed document, smooth out the curling edges of the sheets and place them one by onein the multi-purpose tray.* This feature is supported only for sheets printed from this machine. You cannot make a copy on the printed side.1According to the paper size for 2-sided copying, ensure to set the paper size switch lever accurately.If not securely attached, documents may not be fed properly, or may result in paper jams.1. Open the lower rear cover.2. Securely place the blue color paper size switch lever (A).A4: PullLetter, Legal: PushCopying 2-Sided Document to 2 Sides㻞㻞㻞㻌㻛㻌㻥㻢㻠Downloaded from ManualsPrinter.com Manuals
