Canon ZR40 Instruction Manual

Also see for ZR 40: Brochure & specs Instruction manual

Contents

Canon ZR40 Instruction Manual Manual pdf 96 page image

96EAdditionalInformationInstalling the backup batteryOpen the backup battery cover on the batteryattachment unit, and insert the CR2025 lithiumbattery with the + side facing outwards. Clickthe cover back into place.This backup battery allows the camcorder toremember the date and time and other settingswhen main power source is removed. It has alife span of about a year.When it needs replacing (or if it has not beeninstalled), the y mark flashes in the display.Remove the old battery by pushing up thenreleasing and lifting out. Make sure to attach a power source to the camcorderfirst, so it will remember your chosen settings when you change the battery.DANGER!Treat the battery pack with care.• Keep it away from fire (or it might explode).• Do not expose the battery pack to temperatures greater than 140°F (60°C).Do not leave it near a heater, or inside a car in hot weather, for example.• Do not try to disassemble or modify it.• Do not drop or knock it.• Do not get it wet.WARNING!• The battery used in this device may present a fire or chemical burn hazard ifmistreated. Do not recharge, disassemble, heat above 212°F (100°C) orincinerate.• Replace the battery with a Sony, Hitachi Maxell, Sanyo or Panasonic CR2025,or Duracell DL2025. Use of another battery may present a risk of fire orexplosion.Cautions:• Do not pick up the battery using tweezers or other metal tools — this will causea short circuit.• Wipe the battery with a clean, dry cloth to ensure proper contact.• Keep the battery pack out of reach of children — if it is swallowed, contact aphysician immediately, as the battery case may break down and the batteryfluids damage the stomach and intestines.• Do not disassemble, heat or immerse the battery in water, to avoid the risk ofexplosion.