79EEditingOUTPUTVIDEOS(S1)-VIDEOAUDIOLRRECSEARCH RECSEARCHREW PLAYRECPAUSE SEARCHSELECTZERO SETMEMORYAUDIODUB. STOPAVINSERT PAUSE SLOW– /FOCUS AE SHIFTSAVMICRecording from a VCR, TV or Analog Camcorder (Analog Line-in)You can record a video played on your VCR or analog camcorder (for digitalcamcorders, see p. 77) or a TV program onto a tape in the ZR40, if the TV orother device has audio/video outputs.• If an anomalous signal is sent from the TV or VCR, the images recorded on thetape may also be anomalous (although it may not appear so on the TV image),not recorded at all, or COPYRIGHT PROTECTED DUBBING RESTRICTEDmay appear in the display.• You are unable to dub tapes recorded with the copyright protective signal.1. Connect the camcorder to the VCR.2. Prepare the device.• Set the TV/Video selector on the television to Video. For further details, see“Connections for Playback on a TV Screen” on p. 33.• Turn on the VCR. Load your recorded cassette, and put the VCR in playbackpause mode.• See your TV and VCR instruction manuals for details.3. Turn the camcorder’s POWER switch to PLAY (VCR).4. Load a blank cassette.PreparationsS-150 S-video Cable (optional)STV-250N Stereo Video Cable: Signal flowExample recording from a VCRYou cannot use headphones while doing analog line-in recording. If you have theAV/headphones terminal set to headphones, it will automatically switch to AV foranalog line-in recording. PHONES disappears from the display.
