72EUsing the FullRange of FeaturesYou can also choose to display camcorder data (shutter speed and exposuresettings) in cassette data codes.To change, open the menu and select DISP.SET UP. Then select DATACODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T andclose the menu.DATA CODE•••DATE/TIMEDISP.SET UP( 39)Setting the data codeJAN. 1,200212:00:00 AM12:00 AMJAN. 1,2002F111/250F111/250JAN. 1,2002F111/25012:00:00 AMF111/25012:00 AMJAN. 1,2002F111/250F111/250Date/Time Camera data Date/Time &Camera dataTimeDate & TimeDateDATA CODED/TIME SEL.Notes:• The data code will read “– – –” in the following situations:– During playback of a blank section of tape.– If the tape was recorded before entering the date and time in the camcorder’smemory.– If the tape was recorded on a camcorder without a data code function.– If noise or tape damage prevents the data code from being read.• If a recording made on ZR40 is played back on a different DV camcorder, thedata code may not be displayed correctly.• The data code will appear in the display even if DISPLAYS ( 108) has beenset to OFF through the menu.Possible data code combinations:PLAY(VCR)
