ND Filter70ND FilterUsing the ND filter allows you to open up the aperture to obtain a shallower depth of field even when recording inbright surroundings. You can also use the ND filter to avoid the soft focus caused by diffraction when using smallapertures. You can select one of 3 density levels.You can also change the ND filter remotely using Browser Remote on a connected network device (A 123,128).Press the ND FILTER + or – button to select the desired NDfilter setting.• Repeatedly pressing ND FILTER + button will change the ND filtersetting in the following order: [ND 1/4] [ND 1/16] [ND 1/64] ND filter off (no onscreen display).The ND FILTER – button cycles through the settings in reverseorder.• The selected ND filter setting will appear at the left of the screen.NOTESNOTES• Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom whitebalance (A 71) may be effective in such case.• About changing the ND filter setting using the optional RC-V100 Remote Controller:- When the remote controller is connected to the camcorder, you can use the remote controller’s ND button inthe same way as the camcorder’s ND FILTER + button.- ND filter indicators 1 to 3 will illuminate in orange when the ND filter is set to 1/4, 1/16 and 1/64, respectively.Operating modes:
