Selecting a Network Connection and Changing Network Settings122Selecting a Network Connection and Changing Network SettingsSelecting a Network ConnectionYou can save up to 4 network configuration profiles. If you just saved a new network configuration, it will alreadybe automatically selected so follow this procedure to select a different configuration profile.1 Select [Connection Settings].> [B ! System Setup] > [Network Settings] > [Connection Settings]2 Select the desired network configuration profile.Network configuration profile ([1:] to [4:]) > [L] > [X]Changing Network SettingsYou can check and, if necessary, edit the settings of the currently selected network configuration profile evenafter the initial setup. Changing settings manually requires more advanced knowledge of Wi-Fi and networksettings.1 Select [Connection Settings].> [B ! System Setup] > [Network Settings] > [Connection Settings]2 Select the desired network configuration profile.Network configuration profile ([1:] to [4:]) > [i]• The current network settings will be displayed. Drag your finger up/down or touch [Í]/[Î] to scroll andreview all the information.3 To change the network settings, touch [Edit] and then [Infrastructure], [Camera Access Point] or[Ethernet].• Change the network settings as described in the previous sections.Infrastrucure connections (A 117, from step 3)Camera Access Point connections (A 116, from step 3)Ethernet connections: Connect the network device (step 1, A 121) and change the IP settings (A 117).Operating modes:
