Browser Remote: Controlling the Camcorder from a Network Device126Using Browser RemoteThe Browser Remote application has 2 screens. The main screen, [v], is used for controlling the camcorderremotely in recording mode. The basic screen, [ ], allows users only to zoom or start/stop recording using asmartphone or other device with a small screen.The following sections explain how to use the Browser Remote controls. For detailed information and applicablerestrictions about the functions themselves, please refer to each function’s explanation.NOTESNOTES• Browser Remote does not support multi-touch gestures.The Main Remote Recording Screen [v]When using a computer, tablet and other devices with larger screens, this screen offers all the controls availablefor operating the camcorder remotely via Browser Remote.* Onscreen display/indication only. The content or value cannot be changed using Browser Remote.1 Live view screenShows the camcorder’s live view image. When the live view image is not turned on, the camcorder ID willappear here. The camcorder's live view image will not be displayed when the camcorder is set to internalrecording with a video configuration of 3840x2160 at 50.00P (A 46), and [£ Display Setup] > [HDMIMax Resolution] is set to [3840x2160] (A 108).2 Information about the recording4: Dual recording (A 47).STBY`, REC`: Recording command (A 108)., : Slow & fast motion recording (A 48).z: Pre-recording (A 87).0000x0000: Resolution (A 46).1*2*3*4567 8* 9 1011* 12 13 14 15 16
