94Display Screens of Panorama Creation Tool(1) [Load from camera]Show the panorama image saved in the camera.(2) [Save to camera]Save the currently shown panorama image in thecamera.(3) [Load from file]Show JPEG files as a panorama image.(4) [Save to file]Save the currently shown panorama image as a JPEGfile.(5) Creation date and timeShow the date and time a panorama image wascaptured or loaded from a JPEG file.(6) [Clear]Delete the currently shown panorama image.(7) Panorama Image Display AreaShow the panorama image.(8) [Cancel]Stop the capture of a panorama image.(9) [Start Panorama Creation]Start capturing a panorama image.(10)[Finish Panorama Creation]Confirm the captured panorama image.(11)Status DisplayShow the panorama image capturing status, such as[Capturing images...], etc.(12)[Exposure Lock]Select [Center] or [Current Position] for the autoexposure lock position.(13)[White Balance Lock]Set the white balance to [Do not lock], [Center], or[Current Position].(14)[Focus Lock]Set the focus to [Do not lock], [Center], or [CurrentPosition].Capturing a Panorama ImageThe capture is started.Change the settings beforehand for [Exposure Lock],[White Balance Lock], and [Focus Lock] asnecessary.To stop the capture when underway, click [Cancel].When you position the mouse pointer over thepanorama image, a white grid is shown. If you want torecapture part of the panorama, position the pointerinside the grid, right-click and select [Recapture].To recapture an entire panorama image, click [StartPanorama Creation] again.(1)(5)(6)(7)(8)(11)(9) (10)(14)(2) (3) (4)(12)(13)1 Click [Start Panorama Creation].
