[SSL/TLS] Setting HTTP Communication Encryption775 Setting Page(6) [Display Server Certificate Details]Click [Exec] to view the details of the certificate.(7) [Display Self CA Certificate]Used for the purpose of testing SSL communications,but otherwise not normally used.(8) [Backup]Click [Exec] to perform a backup of the certificatesand private key. This operation can only be performedvia SSL communications.(9) [Restore]Installs the certificates and private key frombackup. Click [Browse] to select the backup file,then click [Exec]. This operation can only beperformed via SSL communications, and will takeeffect after rebooting.Encrypted Communications(1) [SSL Communications]Set SSL communications to [Disable] or [Enable]. Thesetting will take effect after rebooting.However, if no certificate is installed, SSLcommunications cannot be changed to [Enable].Note• It may take a few minutes to generate an SSL key.• If SSL communications are used, video transmissionperformance drops.• Depending on the type of the certificate being installed on thecamera, a dialog box may appear indicating that the webbrowser has accepted the certificate and a connection can bemade.If the dialog box does not appear, register the CA certificate inthe web browser.
