Canon VB-H43 Operation Manual

Also see for VB-H43: Operation guide Installation guide

Contents

114 Setting Event Operations ([Event] tab)Set operations to be performed upon detection ofchanges in a subject.[Event] tab(1) Specify the operation timing. (Multiple checkboxes canbe selected.)[ON Event Operation] checkboxWhen selected, the operations set in (2) [E-mailNotification] and [Video Record] are performed themoment detected mode is triggered to ON.[OFF Event Operation] checkboxWhen selected, the operations set in (2) [E-mailNotification] and [Video Record] are performed themoment detected mode is triggered to OFF.[Detected mode Operation] checkboxWhen selected, the operations set in (2) [E-mailNotification] and [Video Record] are performed for aslong as detected mode is active.(2) Specify the event operation. (Multiple checkboxes canbe selected.)[E-mail Notification] checkboxWhen selected, e-mail notification is performed at thetiming set in (1). [E-mail Notification] must be set inadvance under [Upload] in the Setting page (p. 64).[Video Record] checkboxWhen selected, video record is performed at thetiming set in (1). [Video Record Action] must be set inadvance under [Event] in the Setting page (p. 67).(3) Specify the audio playback timing.[Audio Playback at ON Event] checkboxWhen selected, the sound set in (4) [Sound ClipName] is played at the moment the detected mode istriggered to ON.[Audio Playback at OFF Event] checkboxWhen selected, the sound set in (4) [Sound ClipName] is played at the moment the detected mode isturned OFF.(4) Set the playback sound.[Sound Clip Name]Select the sound that is to be played. The sound clipname set for [Sound Clip Upload] under [Event] in theSetting page is shown in the pull-down list (p. 70).[Volume]Set the audio playback volume in the range of 1 to100.(5) Operation of External Device Output[External Device Output for ON Event] checkboxSelect this checkbox for enabling external deviceoutput at an ON event and select output destination(output 1 or 2) and operation (active or inactive).[External Device Output for OFF Event] checkboxSelect this checkbox for enabling external deviceoutput at an OFF event and select output destination(output 1 or 2) and operation (active or inactive). Setting Detection AreasSet detection areas in the image display area.Setting a [Rectangular] detection areaBy default, a rectangle is shown in the image display area.Move or resize that rectangle to set a detection area.Setting a [Polygonal] detection areaSpecify polygonal areas with a maximum of 32 angles.Click in the image display area to form the polygon pointby point. Click on a previously set point to complete thepolygon and set the enclosed area as the detection area.The set area can also be moved by dragging it.ImportantIt is recommended that the detection criteria are set in acondition as close as possible to the condition in which thecamera is actually used. Perform a detection test in advance tomake sure that the detection frame continues to be displayedfor a subject targeted for passing detection.(1)(3)(4)(5)(2)