77The white balance (WB) function sets the optimal white balance for naturallooking colors to match the shooting conditions.Choose the white balance function.● After pressing the m button, press theop buttons or turn the  dial to choose, then press the m button again.Choose an option.● Press the op buttons or turn the  dial tochoose an option, then press the m button.X The setting will appear on the screen.Custom White BalanceYou can adjust the white balance to the light source at the shooting location.Make sure that you set the white balance under the light source of the actualscene you will shoot.● In Step 2 above, choose .● Make sure the entire screen is filled with aplain, white colored subject, then press then button.X The tint on the screen will change when awhite balance data is set.Adjusting the White BalanceAuto Automatically sets the optimal white balance for the shootingconditions.Day Light Fine weather conditions, outdoor shootingCloudy Cloudy, shady, twilight conditionsTungsten Tungsten, bulb-type (3-wavelength) fluorescent lightingFluorescent Warm-white fluorescent, cool-white fluorescent, warm-white-type(3-wavelength) fluorescent lightingFluorescent H Daylight fluorescent, daylight-type (3-wavelength) fluorescent lightingCustom Manually sets a custom white balance.If you change camera settings after recording white balance data, the tonemay not turn out properly.COPY
