Changing Camera Settings145Changing the Lens Retract TimeFor safety reasons, the lens retracts about 1 minute after pressing the 1button when in a Shooting mode (p. 28). If you want the lens to retractimmediately when you press the 1 button, set the retract time to [0 sec.].● Choose [Lens Retract], then press theqr buttons to choose [0 sec.].Turning Off the Power Saving FunctionYou can set the power saving function (p. 51) to [Off]. Setting it to [On] isrecommended to save battery power.● Choose [Power Saving], then press the mbutton.● Press the op buttons or turn the  dial tochoose [Auto Power Down], then press theqr buttons to choose [Off].● If you set the power saving function to [Off],be sure to turn the camera off after use.Setting the Screen Shut-Off TimeYou can adjust the time the screen takes to shut off automatically (p. 51). Thisalso works when [Auto Power Down] is set to [Off].● Choose [Power Saving], then press the mbutton.● Press the op buttons or turn the  dialto choose [Display Off], then press the qrbuttons to choose a time.● In order to save battery power, you shouldchoose less than [1 min.].COPY
