Using the Face Self-Timer66The shutter will release approximately two seconds after the camera detectsa new face (p. 84). You can use this when the photographer wants to be inthe image, such as a group photo.Choose .● Follow Steps 1 – 2 on p. 61 to choose ,then press the n button for more thanone second.● Press the qr buttons or turn the  dial tochoose , then press the n button.Compose the shot and press theshutter button halfway.● Make sure a green frame appears on theface focused on and white frames appearon other faces.Press the shutter button fully.X The camera will enter shooting stand-by,and [Look straight at camera to start countdown] will appear on the screen.X The lamp will blink and the self-timer soundwill play.Changing the number of shotsAfter choosing in Step 1, press the op buttons.• Shutting both eyes will also be detected as a wink.• If a wink is not detected, the shutter will release approximately 15seconds later.• If there are no people in the shot when the shutter button is pressed fully,the camera will shoot after a person enters the shot and winks.Using the Face Self-TimerCOPY
