List of Messages That Appear on the Screen161Invalid selection range• When choosing the selection range (pp. 118, 121, 125, 139), you tried to choose astarting image that was after the last image or you tried to choose an ending imagethat was before the starting image.Exceeded selection limit• You chose more than 998 images in print settings. Choose less than 998 images(p. 138).• Print settings could not be saved correctly. Reduce the number of selected images andtry again (p. 138).• You chose 501 or more images in Protect (p. 117), Erase (p. 120), Favorites (p. 122),My Category (p. 123) and Print Settings (pp. 136, 138).Communication error• Images could not be transferred to the computer or printed due to the large amount ofimages (approx. 1000) stored on the memory card. Use a commercially available USBcard reader to transfer the images. Insert the memory card into the printer’s card slotto print.Naming error!• The folder or image could not be created because there is an image with the same filename as the folder or image that the camera is attempting to create, or the highestpossible file number has already been reached. In the 3 menu, change [FileNumbering] to [Auto Reset] (p. 144) or format the memory card (p. 23).Lens Error• This error can occur if you hold the lens while it is in motion or when using it in alocation with excessive dust or sand in the air.• If this error message continues to appear, contact a Canon Customer Support HelpDesk as there may be a problem with the lens.A camera error was detected (Error number)• If an error code appears directly after taking a picture, the shot may not have beenrecorded. Check the image in Playback mode.• If this error code reappears, note the Error number (Exx) and contact a CanonCustomer Support Help Desk as there may be a problem with the camera.COPY
