displayed on the touch screen. In this case, tap on the upper left on the touch screen to check themessage and change the setting.• The settings of the page size, media type, etc. are retained even if the printer is turned off.• When copying starts in the copy menu that is not available with the specified setting, The specifiedfunction is not available with current settings. is displayed on the touch screen. Change thesetting, following the on-screen instructions.Following setting items can be changed.• Magnif. (Magnification)Specify the reduction/enlargement method.Reducing/Enlarging Copies• IntensitySpecify the intensity.A. Tap to activate/deactivate automatic intensity adjustment.When ON is selected, the intensity is adjusted automatically according to the originals loaded onthe platen glass.B. Drag to specify the intensity.• Page sizeSelect the page size of the loaded paper.• Type (Media type)Select the media type of the loaded paper.• Paper srcSelect a paper source (Rear tray/Cassette/Auto) where paper is loaded.Note• When Auto is selected, paper is fed from the paper source where the paper that matches thepaper settings (page size and media type) is loaded.• Print qlty (Print quality)Adjust print quality according to the original.264
