|
74 Chapter 9Changing The Machine SettingsBluetooth SettingsFor details, see “Performing Bluetooth Communication” on page 70. Device nameSpecifies the name of this machine that is displayed on a Bluetooth compatible device. Access refusalWhen this is set to , the machine denies access from a Bluetooth compatible device. SecurityWhen this is set to , the passkey can be specified. PasskeyChanges the passkey.Other Settings Date displayChanges the display order for shooting dates to be printed. Read/write attributeSelects whether to allow data to be written onto memory cards from a computer. Power save settingThe LCD goes out if the machine is not operated for 5 minutes. Press any button on theOperation Panel except for [ON/OFF] to restore the display. Even though you can select from<5 minutes>, <15 minutes>, <1 hour>, or <8 hours> as the time until power save starts, theactual time until power save starts does not change. Adjust contrastUse this to adjust the contrast of the LCD if it is too low or too high.Note z When or is selected in the tab on the Settings screen (Memory card), the shootingdate is printed in the date display order you selected. For Printsettings, see “Changing The Print Settings” on page 26.z The shooting date format is as specified in the DPOF setting fromDPOF printing.Important If you set this setting to , the operation for printing ormaintenance cannot be performed. After you finish operation of thememory card dedicated drive, be sure to revert this setting to mode>.
|
