12 Chapter 1Before Printing Operation PanelThis section describes the buttons on the Operation Panel, and their functions and locations.(1) [ON/OFF] ButtonTurns the machine ON and OFF. Before turning ON the machine, make sure theDocument Cover is closed.(2) [Alarm] LampLights if an error occurs, or when the paper or ink runs out.(3) [SCAN] ButtonSwitches the machine to scan mode. In scan mode, the machine scans a document toyour computer according to the operations selected. To use this button, the machinemust be connected to a computer.(4) [MEMORY CARD] ButtonSwitches the machine to Memory Card mode.(5) LCD (Liquid Crystal Display)Displays messages, menu selections, and the operational status.(6) [Menu] ButtonAccesses the settings to customize operation of your machine.The power cannot be turned OFF with [ON/OFF] when the machine is operating.Your machine performs a print head cleaning every time you plug in the machine. Thisensures optimum print quality but also consumes a small amount of ink during thecleaning process.(7) [Settings] ButtonUse to configure the page size, media type and image correction settings.(8) [Stop/Reset] ButtonCancels operations and returns the machine to standby mode.(9) [Black] ButtonStarts black & white copying.(10) [Color] ButtonStarts color copying, color photo printing.(11) [ ][ ][ ][ ] ButtonsScroll through menu selections, and increase or decrease the number of copies or theimage file number.(12) [OK] ButtonSelects an item from the menu, and confirms selections. Restores the machine to normaloperation if there is an error while printing or if the paper jams. Also, use this button toaccept a displayed message.(13) [Back] ButtonReturns to the previous screen.(1) (2) (3) (4) (5) (6) (7) (8)(9)(14) (13) (11) (10)(12)(15)
