Canon PIXMA IP6310D Series Easy Setup Instructions

Also see for iP6310D - PIXMA Color Inkjet Printer: Supplementary guide Quick start guide Quick start guide Printing guide

Contents

start here

Canon PIXMA IP6310D Series Easy Setup Instructions Manual pdf 1 page image

SeriesPhoto PrinterStart HereEasy Setup Instructions1 Unpack the Printer 2 Prepare the Printer 3 Install the FINE Cartridges 4 Align the Print Head (FINE Cartridge)Carefully remove all items from the box.PIXMA iP6310D Photo PrinterPower CordColor FINE Cartridge(CL-41)Photo FINE Cartridge(CL-52)Documentation andSoftware Kit1 Remove the shipping tape from the front and back of theprinter.2 Open (a) the card slot cover first and (b) the front cover next,Pull down and remove the protective material on the rightside.3 Close the front cover first and the card slot cover next.4 Plug the power cord into the back of the printer and connectthe other end to a power outlet.Press the POWER button. The printer will initialize. Wait untilthe POWER lamp remains fully lit.NOTE: Do not connect the USB cable at this stage.5 When the screen appears on the LCD, confirm a languageand then press the OK button.NOTE:•If the language you want to be displayed is not selected, refer to"An Unintended Language is Displayed on the LCD" in the DirectPrinting Guide.•If you leave the printer more than five minutes without using anybutton on the operation panel, the LCD goes into sleep modeautomatically. Press the OK button to turn on the LCD again.6 Open the card slot cover first and the front cover next.The FINE Cartridge holder automatically moves to the left.Write down the serial number. You will need this to registerthe product.1 Take out the Color FINE Cartridge (CL-41) from its box and remove the protectivetape gently.NOTE:•Do not touch the electrical contacts or print head nozzles on a FINE Cartridge. Theprinter may not print out properly if you touch it.•Do not reattach the protective tape once you have removed it.•Handle the removed protective tape carefully to avoid getting your hands dirty orstaining surrounding work area.2 Insert the Color FINE Cartridge slightly slanted into the left slot (C).3 Push up the Color FINE Cartridge until it clicks into place.IMPORTANT: For correct printer operation, make sure the FINE Cartridge is secure inslots.4 Repeat the procedure for the Photo FINE Cartridge (CL-52), inserting it into theright slot (P).5 Close the front cover first and the card slot cover next.IMPORTANT: Wait until the preparatory operation is complete; this takes about oneto two minutes.The message requesting head alignment is displayed on the LCD.Go to the next step.1 Open the paper support and pull out the paper output tray.2 Pinch the paper guide and slide it to the left. Load a fewsheets of blank paper into the auto sheet feeder, then slidethe paper guide toward the left edge of the paper.NOTE: Ensure that the paper thickness lever is set to the leftposition.3 Ensure that the message requesting head alignment isdisplayed on the LCD, select YES using the buttons andpress the OK button.The pattern is printed. And the print head is alignedautomatically.IMPORTANT: It takes about four minutes to finish printing.When automatic print head alignment can not beexecuted correctly, the message "HEAD ALIGNMENTERROR" is displayed on the LCD. refer to "An ErrorMessage is Displayed in the LCD" in the Direct PrintingGuide.Continue with Step 5on side two.To the FINE Cartridge holderFINE CartridgeholderPaper thickness leverProtective materialPower cordSerial numberProtective tapePaper supportPaper output tray(b) Front coverPaper guidePrint sideAuto sheet feederPrint head nozzlesElectrical contacts(a) Card slot cover

/ 2

Related manuals for Canon iP6310D - PIXMA Color Inkjet Printer