4–27COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)MECHANICAL SYSTEM4) Remove the six screws w and two E-rings e;then, remove the support plate r.5) Remove the two pick-up clutches t.Figure 4-34711.Removing the Driver PCB (CassetteModule-A2/Cassette Pedestal-K1)1) Remove the rear cover/upper rear cover.2) Disconnect all connectors from the cassettedriver PCB q.2) Remove the four screws w, and remove thedriver PCB q.Figure 4-348H. Paper Deck Pedestal-K11. Removing the Pedestal Motor DriveAssembly1) Slide out the holding tray to the front.2) Remove the rear cover.3) Disconnect the four connectors q, and removethe harness from harness guide w.4) Remove the three mounting screws e, andremove the pedestal motor drive assembly. r.Figure 4-3492. Removing the Paper Deck1) Remove the front right cover and the front leftcover.2) Remove the mounting screw q, and removethe stopper plate w from both left and right.Figure 4-350 (right)23345212 24332112Download service manual and resetter printer at http://printer1.blogspot.com
