4–8 COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)MECHANICAL SYSTEMFigure 4-211Caution:When installing the cable spring, pay attention to the orientation of the spring. Be sure to install asindicated; if installed in the wrong direction, the hook tip of the spring can interfere with the cable.Figure 4-212Hook HookCable Cable(front) (rear)Cable spring Cable springScrewLoosen thescrew,and shiftit down.Re-tightenthe screw.Attach the mirrorpositioning tool.Set screwsLoosen the setscrews to enablefree rotation.Put the steel ballinto the hole inthe pulley; windthe cable ninetimes toward theinside, and fourtimes toward theoutside; then, snapon the pulley clip.Pulley clipSteel ball46.5~49mm8974111015632Download service manual and resetter printer at http://printer1.blogspot.com
