Performing a Quick Start of the Machine167A-00RIf you specify the quick startup settings, you can reduce the time from when the power switch is pressed until thescreens become operable. The way of turning OFF the power to perform a quick start of the machine is called "quickturn-OFF."Configuring Quick Startup Settings(P. 36)Turning OFF the Power (Performing a Quick Turn-OFF)(P. 37)Before Configuring Quick Startup SettingsWhen you are using a networkIf any of the settings below is , the quick start function is disabled.● RARP, BOOTP, IPv6 Network(P. 178)● IPSec Configuring IPSec Settings(P. 291)When you are using the MEAP functionCheck whether the currently installed MEAP applications support the quick start function.Configuring Quick Startup Settings1 Press ( ).2 Use / to select , and press .3 Select , and press .4 Select , and press .Disables the Quick Start function.Enables the Quick Start function.5 Perform a hard reset. Performing a Hard Reset(P. 448)➠ The settings are enabled after the hard reset is performed.Basic Operations36
