[Copies]Specify the number of copies.[Paper Size]Specify the size of the paper to print on.● When you want to print a PDF file or XPS file, specify [Auto] to automatically select the optimum paper size.If no optimum size is found, the paper size set in is selected ( Standard PaperSize(P. 452) ).[Paper Type]Specify the type of the paper to print on.[Manual Feed]If you select the check box, a document is printed only on the paper loaded in the multi-purpose tray.[Enlarge/Reduce to Fit Paper Size]If you select the check box, printouts are enlarged or reduced printouts according to the PrintableArea(P. 561) of the paper. The printouts are enlarged or reduced with the original aspect ratio kept.● If [Paper Size] is set to [Auto], this item is unavailable.[Image Orientation]Specify the print orientation of an image.[Auto] Automatically determines the print orientation based on the width and height of theimage.[Vertical] Select when printing a vertically-long image.[Horizontal] Select when printing a horizontally-long image.● If the specified setting of [Vertical] or [Horizontal] does not match the orientation of the image, thereduced image is printed.[Print Position]Specify the position to print the image.[Auto] If the TIFF data contains the information that specifies the print position, the image isprinted according to the information, otherwise, it is printed at the center of paper.JPEG data is always printed at the center of paper.[Center] Images are printed at the center of paper.[Top Left] Images are printed at the top left.Printing a Document149
