Drawer 1 to 4 *You can adjust the vertical/horizontal print position for printing on paper fed from a paper drawer.Offset Y (Drawer 1 to 4)/ Offset X (Drawer 1 to 4)-5.0 to 0.0 to +5.0 (mm)Recovery PrintingSelect whether to print again the page of which printing was interrupted by a paper jam or an error.OffOn( ) or Check Paper SizeSelect whether to check the size of paper that is fed from the paper source with the paper size set to . If youselect , the message for confirming the paper size is displayed and the printing is stopped when the size of thepaper fed from the paper source does not match the print data.OffOn( ) or ● If the difference in size between the fed paper and the print data is not so large, it is possible that nomessage will be displayed and the printing will be continued even when the selected setting is .Substitute SizeSelect whether to print by substituting A4 size paper and Letter size paper with each other. If you select , Lettersize paper is used for printing when you have specified A4 size paper for printing from a computer but the A4 sizepaper is not loaded in the machine.OffOnSetting Menu List401
