[Use IPSec]When using IPSec in the machine, select the check box. When not using, clear the check box.[Allow Receive Non-Policy Packets]If you select the check box when using IPSec, packets that are not available for the registered policies arealso sent/received. To disable sending/receiving the packets that are not available for the policies, clear thecheck box.6 Perform a hard reset.● Click [Device Control], select [Hard Reset], and then click [Execute].➠ The settings are enabled after the hard reset is performed.Using the operation panel● You can also enable or disable IPSec communication from the setting menu of the operation panel.IPSec(P. 379)LINKSConfiguring Settings for Key Pairs and Digital Certificates(P. 308)IPSec Policy List(P. 443)Security301
